Testing Method 74
The waterproofer was prepared according to the label directions by mixing the equivalent of 2 pints of cold water to 10 pounds of DRYLOK powder. After mixing until smooth, the equivalent of 2 pints of cold water was added for “normal application” or 1.5 pints for “Heavy application”. To distinguish between the two application conditions, a few drops of magenta colorant were added to the mixture.
The mixtures were applied to a high pH substrate. A vinyl acrylic negative control was included to show absolute failure for a comparison. The block was allowed to cure at normal room conditions for three days. After the three day cure, panels were placed into a Q-Fog under the water fog cycle (ASTM D 1735-08) simply put – 1 hour of condensation, 1 hour dry-off at 95°F. After one week of exposure, the panels were rated for efflorescence resistance.
Negative Control-Color Accents Vinyl Acrylic Paint (Sherwin Williams) – 4
DRYLOK Powder Masonry Waterproofer – Normal Application – 10
DRYLOK Powder Masonry Waterproofer – Heavy Application – 10
CRGI Test Method 74 – Rating
10= No defect observed
1 = Severe defect observed