UGL® Acrylic Latex Caulk

UGL® Acrylic Latex Caulk

UGL® Acrylic Latex Caulk is an economical, all-purpose, siliconized acrylic compound for use under latex or oil-based paints. It bonds to wood, masonry, tile, glass, and metal. Flexible year-round, UGL® Acrylic Latex Caulk requires no priming, is paintable, will not stain or bleed, and cleans up easily with water.

UGL® Acrylic Latex Caulk Application

Quick Overview

Product Features:

  • Interior/exterior
  • Acrylic-silicone
  • Ready to use caulk
  • Size: 10.5 ounce cartridge
  • Coverage: 36 linear feet with a .25” bead
  • Cure time: 12 hours

Surfaces

  • Wood
  • Masonry
  • Tile
  • Glass
  • Metal

Ready-Mixed Colors

White White

Please note, colors are RGB web approximations of the actual shades.

Downloads

Preparation

The opening to be sealed must be free from frost, moisture, dirt, rust, loose caulk, putty, and mortar before applying UGL® Acrylic Latex Caulk.*

Application

Insert cartridge into any standard caulk gun. Select the size of the bead by cutting the plastic spout at your preferred measurement (five-sixteenths-inch, one-quarter-inch or one-eighth-inch) on the cartridge tip. Cut the spout at a 45-degree angle. Angle the spout tip over the space to be sealed.

Apply only when air and surface temperatures are above 50°F. Applications under extreme dampness or high humidity prolong drying and curing time by as much as 36 hours, making the caulk vulnerable to driving rain.

If the opening is more than .25” deep, use oakum or another backing material to fill it within .25” of the surface. After application, the caulk bead may be easily smoothed with a wet finger or damp cloth. Before curing, remove any excess caulk with a damp cloth.

Before painting with oil-based paint, allow the compound to dry overnight. Allow one hour before painting with latex paint. Do not store in areas of extreme heat or cold.

Disposal

Dispose of contaminated absorbent, container and unused contents in accordance with local, state and federal regulations.

USAGE STATEMENT: Prior to use, carefully read the product label and follow the directions. For technical information, warnings, cautions, notices, and additional information, download and read the documentation available on this website.

* WARNING: If you scrape, sand or remove old paint, you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting the National Lead Information Hotline at 1-800-424-LEAD or visit www.epa.gov/lead.