UGL® Driveway Crack Filler

UGL® Driveway Crack Filler

If you want asphalt to last, it requires maintenance. Regularly filling cracks in asphalt driveways, sidewalks, parking lots and recreation areas plays an important role in protecting and extending the lifespan of your investment. Featuring excellent adhesion to damp surfaces, UGL® Driveway Crack Filler seals and waterproofs to help prevent moisture from getting under the surface and causing damage. It also keeps vegetation from growing up through the cracks, a situation that can cause pavement to push up and heave. UGL® Driveway Crack Filler is non-flammable, offers easy gunning and water cleanup, and may be subjected to traffic just 2 hours after application.

UGL® Driveway Crack Filler Application

Quick Overview

Product Features:

  • Use for asphalt driveways, sidewalks, parking lots, recreation areas
  • Acrylic-silicone formulation
  • Ready-to-use caulk
  • Size: 10.5 ounce cartridge
  • Coverage: 36 linear feet with a .25” bead
  • Cure time: 12 hours

Surfaces

  • Asphalt

Ready-Mixed Colors

Black Black

Please note, colors are RGB web approximations of the actual shades.

Downloads

Preparation

The opening to be sealed must be free of moisture, frost, dirt, dust, and loose particles.* Deep cracks (larger than .25” wide) should be filled to within .25” of the surface with a backing material like oakum prior to sealing. Hosing and wire brushing will facilitate cleaning. Remove excess moisture and ponded water with a brush or dry cloth before sealing.

Application

Insert the cartridge into any standard caulk gun. Select the size of bead by cutting the plastic spout at your preferred measurement (five-sixteenths-inch or one-quarter-inch) on the cartridge tip. Cut the spout at a 45-degree angle.

Puncture the inner seal in the spout with a screwdriver. Force the compound tightly into the crack. Smooth down the patch with a wet putty knife or trowel. Allow UGL® Driveway Crack Filler to dry overnight before painting it with an asphalt base paint. The drying and curing of all latex sealants (normally cured in 12 hours) is affected by temperature and humidity. Apply only when air and surface temperatures are above 50°F. Application under conditions of extreme dampness or high humidity prolongs drying and curing time by as much as 36 hours, making sealant vulnerable to driving rain. Clean your tools with soap and water upon completion.

Disposal

Dispose of contaminated absorbent, container and unused contents in accordance with local, state and federal regulations.

USAGE STATEMENT: Prior to use, carefully read the product label and follow the directions. For technical information, warnings, cautions, notices, and additional information, download and read the documentation available on this website.

* WARNING: If you scrape, sand or remove old paint, you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting the National Lead Information Hotline at 1-800-424-LEAD or visit www.epa.gov/lead.