- Use on tubs, showers, tile, metal, wood, masonry, and glass
- Acrylic-silicone formulation
- Bright white
- Easy-squeeze caulk tube
- Size: 6 ounce tube
- Coverage: 36 linear feet with a .25 inch bead
- Cure time: 48-72 hours
Please note, colors are RGB web approximations of the actual shades.
The opening to be sealed must be dry and free of moisture, dirt, grease, dust, soap film, and loose caulk*. Remove any soap film with rubbing alcohol.
Apply only when air and surface temperatures are above 50°F. Place the spout-tip at an angle over the area to be sealed. Deep cracks (larger than .25” wide) should be filled to within .25” of the surface with a backing material like oakum prior to caulking. Start at the bottom of the area to be sealed and work up as the void is filled. Wipe off any excess caulk with a damp cloth before it dries (approximately 30 minutes). Note: be sure to knead the tube in your hand before applying.
Allow UGL® Tub & Tile Caulk to dry for 48-72 hours before using shower. Temperature and/or high humidity will extend the drying time. After the caulk is applied, wait one hour before painting with a latex paint. Wait overnight before painting with an oil-based paint. To reset a tile, apply UGL® Tub & Tile Caulk liberally at the center and at each corner. Place the tile firmly in the proper position. Clean tools with soap and water upon completion.
USAGE STATEMENT: Prior to use, carefully read the product label and follow the directions. For technical information, warnings, cautions, notices, and additional information, download and read the documentation available on this website.
* WARNING: If you scrape, sand or remove old paint, you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting the National Lead Information Hotline at 1-800-424-LEAD or visit www.epa.gov/lead.